Furuno FMD-3200 User Manual

12. NAVIGATION TOOLS
12-12
12.9 Divider
The divider performs the following calculations:
The divider is available in the Voyage navigation and Voyage planning modes. Only
one divider can be displayed. The divider is neither saved nor shared among
FMD-3000, FAR-3xx0, FCR-2xx9.
12.9.1 How to use the divider
Do as shown below to use the divider.
You can also drag from an intermediate point to make another point.
• Range and bearing between two points • TTG between two points
• Total TTG from start to end • Total distance from start to end


Right click
starting point
Select New
Divider
00.00
00.00
Drag circle to
next point
2.6NM
055.1°
00.00
00.00
00:00
00:00
5.0NM
051.2°
00:32
00:32
5.9NM
Divider appears.
Distance and bearing
between points
- TTG to point
- Total TTG
- Total distance
Ship off center
Pick Report
Chart Legend
Manual Update
New Divider
Starting point
Point(s) can be deleted. Put the cursor on a point, right click, then select [Delete Points] from
the pop-up menu. The point(s) deleted depends on the point selected.
Delete end point
Delete intermediate point
Connecting
points are
deleted.
End point
Intermediate point
How to delete points

Furuno FMD-3200 Specifications

General

Brand	Furuno
Model	FMD-3200
Category	Marine Equipment
Language	English