19. RECORDING, PLAYBACK FUNCTIONS
19-8
19.4 Chart Usage Log
The [Chart Usage] log stores which charts were used on the ECDIS display. To open
the log, click [Log], [NAV Log] and [Chart Usage] on the InstantAccess barâ„¢. The fol-
lowing information is recorded in the chart usage log:
• Date and time chart was displayed
• Chart ID
• Center position of display (Lat, Lon)
• Chart source
• Chart edition
• Display scale
• Compilation scale
• The latest update included to chart
• Chart base
• To show the logs of a specific period, enter the period to show with [Period Cov-
ered (UTC)] then click the [Set Period] button. Use the [Clear Period] button to display
all logs. Log entries outside the set period become gray and the entries inside the set
period remain visible. To show log entries which are not visible, spin the scrollwheel
upward to scroll up the log, downward to scroll down the log.
• To refresh the log, click the [Refresh] button.
• To search the log, do as follows:
1) Click the [Find] button to show the [Find text] box.
2) Click the input box then enter the text to search.
3) Select the search direction with the up or down radio button.
4) Click the [Find] button. The first matching text is highlighted in yellow at the top of
the screen.
5) To continue the search click the [Find] button. To cancel the search, click the
[Cancel] button.
• To print the log, click the [Print Text] button.
To Next Page
Loading...
Need help?
General
