To Next Page

To Previous Page

1. INTRODUCTION

1-20

1.18.2 Function availability

1.18.3 Split screen usage characteristics

• If the sub view is not displayed correctly, restore the full screen display then try to

activate the split screen again.

• The display may not be updated when switching to the Voyage planning mode. If

this occurs, switch to the Voyage navigation mode, restore the split screen display

then return to the Voyage planning mode.

• The own ship mark may not appear at the screen center when releasing the split

screen display. If this occurs, click the indication "TM/CU Reset" at the top right po-

sition on the screen to show the own ship mark at the screen center.

• The TM reset feature only works on the active display. To return the own ship mark

to the screen center, click the indication [TM/CU Reset] at the top right position on

the screen.

• The sub view can use a location and chart scale different from the main view.

• The chart scale related messages (overscale, larger ENC available, etc.), which ap-

pear beneath the chart scale indication, show only on the main view.

Item

Viewable Operable

MainSubMainSub

AIS target Yes Yes Yes Yes

Anchor watch Yes Yes Yes No

Chart display Yes Yes Yes No

Danger highlight Yes Yes Yes No

Divider Yes Yes Yes No

EBL, VRM Yes Yes Yes Yes

Parallel index lines Yes Yes Yes Yes

Radar overlay Yes No Yes -

Range rings Yes Yes Yes No

TT Yes Yes Yes Yes

Weather overlay Yes No Yes -

Furuno FMD-3200 User Manual

Other manuals for Furuno FMD-3200