Furuno FMD-3200 User Manual

1. INTRODUCTION
1-8
Manual brilliance adjustment with the trackball module
1. Click the [BRILL] button on the InstantAccess bar™ to show the brilliance adjust-
ment window.
2. For coarse adjustment, put the cursor on a location within the slider bar area
then push the left button. For fine adjustment, put the cursor on the end of the
slider bar and roll the trackball while holding down the left button.
3. Release the left button to confirm setting. The calibration state indication changes
to "UNCALIB".
4. Click the [CALIB] button to calibrate the brilliance. The calibration state indication
changes to "CALIB".
1.8.2 Control unit backlighting
Put the cursor on the backlighting setting, and up and down arrows appear. Click the
arrows to adjust the backlighting.
Current backlighting
level
Click arrows to set
backlighting.
Backlight setting
range

Furuno FMD-3200 Specifications

General

Brand	Furuno
Model	FMD-3200
Category	Marine Equipment
Language	English