9. ROUTES
9-14
• The route must have been checked.
9. To save the route, click the [Save] button and enter a name for the route, using
the keyboard on the Control Unit or the software keyboard.
If necessary you can drag waypoints to new position, like with an ordinary route.
9.7 Route Bank
The route bank stores all the routes you have created. You can copy waypoints used
in a route stored in the route bank to a non-active route. To show the route bank in the
Voyage planning mode, select [Route], [Route Bank] in [Route Plan] dialog box:
1. Click the [PLAN] button on the Status bar to get into the Voyage planning mode.
2. On the InstantAccess barâ„¢, click [Planning] and [Route].
3. Click the [Select] button to show the [Select Route] dialog box.
4. Select the route (active route) for which you want to copy its waypoint(s) in the ac-
tive route. For example, select Route2. Click the [Open] button.
5. At the bottom of the [Route Plan] dialog box, click the [Route Bank] button.
Date created or
modified
Route ID
Total distance of route
Position of final waypoint
Total no. of waypoints
Position of start waypoint
Route name
177.5NM
To Next Page
Loading...
Need help?
General
