Furuno FMD-3200 User Manual

3-1
3. HOW TO MANAGE CHARTS
This chapter mainly shows you how to install the public keys, licenses and charts,
manually update chart objects, and synchronize charts. All chart-related operations
begin from the Chart maintenance mode, which you access by clicking the [CHARTS]
button on the Status bar.
Note 1: Charts, routes and user charts are shared with other FMD-3xx0, FCR-2xx9
and FAR-3x00 units, via LAN. Data is shared automatically; no operation is required.
Note 2: Chart processing (installation, deletion, etc.) may take several minutes de-
pending on the number of charts to be processed.
Note 3: If, when attempting to install charts, nothing appears on the display at the start
of the procedure, reset the power and try again.
Note 4: If installation of AVCS charts stops, the message "Chart installation has
stopped. Run the installation again. Installation will continue from the chart not yet in-
stalled." appears. This does not indicate completion of the installation. Restart the in-
stallation. The installation resumes from the chart not yet installed.
This message may also appear when installing C-MAP ENC SERVICE, C-MAP PRO-
FESSIONAL+ C-MAP ENC+ SERVICE charts if the user does not confirm completion
of the installation within approx. one hour. (Installation window remains on the screen.)
However, this is not an indication of failed installation.
Note 5: Do not install AVCS and C-MAP DL charts at the same time. This can cause
errors in the map files and can result in failure to obtain chart data from C-MAP.
Note 6: When installing the AVCS LargeMedia, the message "No connection to don-
gle" may appear in the [Result] window at the completion of the installation. If this oc-
curs, reinstall the media.
3.1 How to Install Public Keys for ENC Charts
Public keys authenticate the source and integrity of the ENC chart materials used in
this chart system. Before you install a new ENC chart, confirm that the corresponding
public key is installed.
1. Set the medium (DVD, USB flash memory, etc.) that contains the public key. (The
IHO public key is pre-installed.)
2. Get into the Chart maintenance mode then click the [Public Key] button on the
InstantAccess bar
™
.
3. Click the [Load New Key] button to show the [Open File] dialog box.

Furuno FMD-3200 Specifications

General

Brand	Furuno
Model	FMD-3200
Category	Marine Equipment
Language	English