21. PARAMETERS
21-4
21.4 Instant Track Parameters
The instant track feature can create, in route monitoring, a simple route in the following
situations:
• Return to the monitored route when the vessel goes outside the channel limits.
• Temporarily deviate from the monitored route (avoid collision, etc.).
How to set instant track parameters
Set the parameters for the instant track ([MENU]ï‚®[General]ï‚®[Ship & Route Param-
eters]ï‚®[Instant Track] tab).
[Delay before Initiating First Turn]: Set the number of seconds (30 - 600 seconds)
to wait before initiating the first turn in the simple route.
[Turn Radius]: Set the turning radius (0.02 - 3.00 NM) to use between waypoints (four
waypoints) in the simple route.
[XTD Limit]: Set the channel limit (10 - 3704 m) for the instant track, automatically or
manually. The [Auto] setting uses the channel limit set for the monitored route.
[Route Check Strictly]: Check to prevent monitoring of instant track when a chart
alert (alarm or warning) is found through the route check. Uncheck to monitor instant
track in spite of chart alert found through the route check.
To Next Page
Loading...
Need help?
General
