WARNING
CAUTION
Warning, Caution
Prohibitive Action
Mandatory Action
Do not open the equipment.
This equipment uses high voltage that
can cause electrical shock.
Only qualified persons can work inside
the equipment.
Turn off power at switchboard if the
something is dropped inside the
equipment.
Fire or electrical shock can result if the
power remains on.
Turn off power at switchboard if the
equipment is emitting smoke or fire.
Fire or electrical shock can result if the
power remains on.
Do not place liquid filled containers
on the top of the equipment.
Fire or electrical shock can result if a
liquid spills into the equipment.
Use the correct fuse.
Use of a wrong fuse can cause fire
or damage the equipment.
Do not dissassemble or modify the
equipment.
Fire, electrical shock or bodily injury can
result.
Do not operate the equipment with
wet hands.
Fire or electrical shock can result.
Keep the equipment away from areas
where contact with water is likely.
Fire or electrical shock can result if
water gets into the equipment.
WARNING
Warning labels are attached to the Processor
Unit. Do not remove any label. If a label is
missing or damaged, contact a FURUNO
agent or dealer about replacement.
Name: Warning Label (1)
Type: 86-003-1011-3
Code No.: 100-236-233-10
Warning Label
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
WARNING
To avoid electrical shock,
do not remove cover.
No user-serviceable parts
inside.
Name: Warning Label (2)
Type: 03-129-1001-3
Code No.: 100-236-743-10
WARNING
The operator must read the safety instructions before attempting to operate the equipment.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury.
To Next Page
Loading...
Need help?
General
