Garmin aera 660 Pilot’s Guide
190-02017-20 Rev. E
32
Overview
OverviewNavigationFlight PlanningHazard AvoidanceAdditional FeaturesAppendicesIndex
3D VISION SETUP
Setting up 3D Vision:
1)
From the Main Menu, touch Tools > Setup > 3D Vision.
2)
Touch the 'Bug Indicator' Data Option Button, and touch the desired
option from the list (User Selected, Bearing, Desired Track, or Off).
3)
Touch the desired settings to display (Ground Speed, Altitude, AGL,
Heading, Lateral Deviation, Vertical Deviation, Vertical Speed,
Slip/Skid, Synthetic Vision and Traffic).
4)
Touch On/Off to enable/disable 'Panning Timeout'.
NAVIGATION SETUP
Waypoint Transition Mode can be set to 'Auto' or 'Distance'. In 'Auto' mode the unit
selects the "best" next waypoint based on the aircraft's present position. 'Distance'
mode allows the pilot to enter a radius around the active leg destination so that when
the aircraft is within the entered distance, the unit transitions to the next waypoint in
the route.
Changing the waypoint transition mode:
1)
From the Main Menu, touch Tools > Setup > Navigation.
2)
Touch the 'Waypoint Transition Mode' Data Option Button, and touch
the desired option from the list (Auto or Distance).
KEYBOARD SETUP
Setting up keyboard format:
1)
From the Main Menu, touch Tools > Setup > Keyboard.
2)
From the 'Keyboard Format' Data Field, touch ABCDE or QWERTY to
arrange the keyboard in alphabetic or traditional layout.
3)
Touch Preview to inspect keyboard layout.
To Next Page
Loading...
Need help?
General
