3-45 ● Printing with Date/Time Changed to Other Characters
5
4
3
Press ↓ three times consecutively.
The cursor is then positioned in the "Hour" field.
Press → four times consecutively.
The cursor then moves to the <Substitution rules> row.
Press 1 .
A substitution rule setting of 1 is then selected for "Hour".
To change substitution rule numbers, move the cursor to the
"Substitution rules No." field.
6
Press Apply .
The "Substitution rule setup" screen for "hour" then opens.
００[ ] ０１[ ] ０２[ ] ０３[ ] ０４[ ] ０５[ ]
０６[ ] ０７[ ] ０８[ ] ０９[ ] １０[ ] １１[ ]
１２[ ] １３[ ] １４[ ] １５[ ] １６[ ] １７[ ]
１８[ ] １９[ ] ２０[ ] ２１[ ] ２２[ ] ２３[ ]
Subst. rule setup
2011.07.07 12:45
No.[０１] Type [Hour ]
Manual
Show
cursor
Status: Ready Com=0
Start
up
Shut
down
Comm
On/Off
¡
If the "year", "month", or "day" substitution setup is displayed, you can
switch to the "hour" substitution setup by pressing Previous display or
Next display .
If the cursor is not
displayed, press
Show cursor .
7 Press Substitution rules .
2 Press Calendar conditions .
The "Calendar conditions" screen then opens with the cursor positioned
in the year input field.
1234567890
Incre-
ment
Decre-
ment
Calendar conditions
Column 1 Column 2 Column 3
[ＵＳＥ ＢＹ・・・・] [ＹＹ．ＭＭ．ＤＤ・・] [・・・・・・・・・・]
[ＹＹ．ＭＭ．ＤＤｈｈ] [ＭＦＧ ＤＡＴＥ・・] [・・・・・・・・・・]
[ＡＢＣ・・・・・・・] [ＣＣＣＣ・・・・・・] [・・・・・・・・・・]
2011.07.07 12:45
Back
＜Offset＞ ＜Substitution rules＞ ＜Zero-suppression＞
Year ［００００］［０］(0:Disable 1:Enable)［０］(0:Disable 1:Enable)
Month
［
００００］［０］(0:Disable 1:Enable)［０］(0:Disable 1:Enable)
Day ［００００］［０］(0:Disable 1:Enable)［０］(0:Disable 1:Enable)
Hour ［００００］
［
０］(0:Disable 1:Enable)［０］(0:Disable 1:Enable)
Minute ［００００］
Substitution rules No. [０１]
Manual
Show
cursor
Prev.
item
Next
item
↓
↑
→
←
Status: Ready Com=0
Substitution
rules
Message name
［
］
Start
up
Shut
down
Comm
On/Off
If the cursor is not
displayed, press
Show cursor .
Cursor will move to the
line you touched.
Selected item on the
cursor-positioned line
can be changed
by touching.
To Next Page
Loading...
Need help?
General
