Hitachi PXR-D User Manual

● On-screen Message Descriptions 8-7
9
8.2.2 Warning messages
No.
Message
The ink level in the ink
reservoir is too low.
1
2
¡ Add ink within 60 minutes
( page 7-6).
Ink Low Warning
Meaning of message
Remedy
The makeup ink level in
the makeup ink reservoir
is too low.
¡ Add the makeup ink within 60
minutes ( page 7-7).
Makeup Ink Low
Warning
3
The cumulative ink
ejection time exceeded
the preselected alarm
time.
¡ Replace the ink
( page 7-8).
Ink Shelf Life
Exceeded
4
The ambient
temperature is higher
than the upper-limit
operating temperature.
¡ Ensure that the ambient
temperature is within the
operating temperature limits.
Operating
Temperature Too
High
5
The ambient
temperature is lower
than the lower-limit
operating temperature.
¡ Ensure that the ambient
temperature is within the
operating temperature limits.
Operating
Temperature Too
Low
6
The ink heating section
is faulty.
¡Contact your nearest local
distributor.
Ink Heating Too
Low
8
The built-in battery
voltage is too low.
¡Contact your nearest local
distributor.
¡ When making prints, set the
correct calendar time again
from the date/time setup
screen ( page 4-10).
Battery Low
7
The external
communication function
is not normally
exercised.
¡Note the error code and see
that no more errors occur.
External
Communication
Error nnn
Next speed synchro-
nization signal is entered
while printing is turned
on by the previous
speed synchronization
signal.
¡Expand the interval between
the speed synchronization
signals or decrease the
dividing ratio.
Product Speed
Matching Error
10
Ink pressure value is not
at the proper level.
¡ Operate the pressure-
reducing valve to adjust the
pressure.
Ink Pressure Low
11
Ink pressure value is not
at the proper level.
¡ Operate the pressure-
reducing valve to adjust the
pressure.
Ink Pressure High
12
Measurement results of
viscometer vary.
¡Contact your nearest local
distributor.
Viscosity Reading
Instability
13
Viscometer does not
function normally.
¡Contact your nearest local
distributor.
Viscosity Readings
Out of Range
14 Ink concentration is high.
¡Ink concentration is now
adjusted to normal level.
If print quality is still poor,
replace ink with a new one.
( page 7-8)
High Ink
Concentration
15 Ink concentration is low.
¡Ink concentration is now
adjusted to normal level.
If print quality is still poor,
replace ink with a new one.
( page 7-8 )
Low Ink
Concentration
16
Excitation V-ref. needs
to be reviewed.
¡Find out optimum excitation
V-ref. on nozzle property test
screen, and update the old
excitation V-ref.. ( page
7-34)
Excitation V-ref.
Review

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English