Hitachi PXR-D User Manual

3-1 ● Editing Print Data and Printing
3. Editing Print Data and Printing
(1) Overview
¡ Input the contents to be printed from the "Print description" screen.
¡ Select the Print line setup , Print format , Edit message or Print spec.
screen from the menu and set the contents to be printed.
¡ The print image can be checked in the print layout area after input.
The contents can be
set even when the
Status shows either
"Stop", "Standby" or
"Ready".
》《
Column 1 Column 2 Column 3
[・・・・・・・・・・] [・・・・・・・・・・] [・・・・・・・・・・]
[・・・・・・・・・・] [・・・・・・・・・・] [・・・・・・・・・・]
[・・・・・・・・・・] [・・・・・・・・・・] [・・・・・・・・・・]
Print description
2011.07.07 12:45
Select
message
Message name
［  ］
Start
up
Shut
down
Manual
Menu
Print line
setup
Edit
message
Print
format
Print
spec.
Comm
On/Off
Print layout
Status: Stop Com=0
Prev.
col.
Next
col.
Print description
setting area
Print layout
indication area
Save
message
¡ At the system startup, the data that was printed last time is indicated.
Typical print description screen at the system startup
》《
ＵＳＥ ＢＹ
ＭＦＧ ＤＡＴＥ
０５．０７．０７
０５．０９．０７
Column 1 Column 2 Column 3
[USE BY ・・・・] [ＹＹ．ＭＭ．ＤＤ・ ・ ] [・・・・・・・・・・]
[ＹＹ．ＭＭ．ＤＤ・・] [MFG DATE・・] [・・・・・・・・・・]
Print description
2011.07.07 12:45
Message name ［  ］
Manual
Menu
Print
format
Print
spec.
Status: Ready Com=0
Prev.
col.
Next
col.
Print layout
Select
message
Start
up
Shut
down
Print line
setup
Edit
message
Comm
On/Off
Save
message

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English