WARNING
Safety Precautions
Pictograph Examples
¡
Before using the printer, thoroughly read the following safety precautions for optimum printer use.
¡
You should observe the precautions set forth below in order to use the product properly and avoid
endangering or causing damage to you or other persons. For the purpose of clarifying the severity of
injury or damage and likelihood of occurrence, the precautions are classified into two categories,
WARNING and CAUTION, which both describe the hazardous situations that may arise if you ignore
the precautions and perform an incorrect handling or operating procedure. The precautions in these
two categories are both important and must therefore be observed without fail.
CAUTION
WARNING is used to indicate the presence of a hazard which may cause
severe personal injury or death if the warning against performing an
incorrect handling procedure is ignored.
CAUTION is used to indicate the presence of a hazard which may cause
personal injury or property damage if the warning against performing an
incorrect handling procedure is ignored.
¡
If the warning in the CAUTION category is ignored, serious results may occur depending on the
situation.
¡
After the manual has been read, it must be stored in such a location that all printer operation
personnel can refer to it at all times.
¡
All the instructions set forth in this manual are important and must therefore be observed without
fail.
The △ symbols are used to indicate precautions (including those related to potential hazards and
warnings) to be observed. Detailed information is furnished by a picture within the symbol outline (a
shock hazard is indicated by the example shown at left).
The ○ symbols are used to describe prohibited actions. The details of a prohibited action are given
by a picture within or near the symbol outline (the example shown at left dictates that you must keep
flames away).
The ● symbols are used to describe required actions. Detailed instructions are given by a picture
within the symbol outline (the example shown at left dictates that a ground connection must be
made).
（）
Restrictions on Export
User hereby agrees not to export or re-export this product to any end-user who the user has reason to
suspect may utilize the product for the design, development or reproduction of nuclear, chemical or
biochemical weapons.
File management is carried out using eParts made from eSOL.
To Next Page
Loading...
Need help?
General
