● Long-term Shutdown 7-40
7.15 Long-term Shutdown
7.15.1 Process to be performed prior to long-term shutdown
(1) Overview
¡
This operation is storage work performed in the case where the IJ printer is shut
down exceeding the term indicated in Table 1.
¡
The storage procedure for long-term shutdown is completed by draining the ink
from the ink circulation system and cleaning it with the makeup ink.
1
Open the "Circulation control" screen, and press the
Process prior to long-term shutdown key and then the
Start/Continue key.
1. Store the printer at a temperature as low as possible.
2. This operation is not necessary in the case where the printer can be
operated once during the term indicated in Table 1. Follow 1.2.5
"Cautions on operating time when printer is in service" as to the
operating time in that case.
Notice
(2) Operating procedure
Table 1 Storage temperature and Term
Storage temperature Term *1
0 to 35℃ 3 weeks 10 days
35 to 40℃ 2 weeks 7 days
40 to 45℃ 1 weeks 5 days
2
Perform 2 to 6 of the procedure in "7.5 Ink Replacement."
¡
Follow the on-screen instructions for the operation.
*1 JP-K77, JP-K81 and JP-K86 See "1.2.1(4) j Caution of JP-K77, JP-K81
and JP-K86".
To Next Page
Loading...
Need help?
General
