Hitachi PXR-D User Manual

4-2 ● Managing the Operations
3
2 Press Operation management .
The "Operation management" screen then opens.
1234567890
Operation management
Ink operating time  ［０１００］ (hours)
Ink alarm time ［１２００］ (hours； standard value:1200)
Cumulative op. time ０００１００ (hours)
Print count ［０００００１０００］ (prints)
Ink, makeup ink JP-K67, TH-TYPE A
Ink viscosity 100 (standard value:100)
Ink pressure 0.255 (MPa ; standard value:0.255)
Ambient temperature 21 ( C; range: 0〜45)
Deflection voltage 5.6 ( k V)
Excitation V-ref. 10 (0〜19)
Excitation frequency 68.9 (kHz)
2011.07.07 12:45
Cancel
changes
Reset
Incre-
ment
Decre-
ment
Back
Manual
Show
cursor
↓
↑
→
←
Status: Ready Com=0
Start
up
Shut
down
Comm
On/Off
Press Reset .
The operating time field then reads [0000] hours.
Operation management
Ink operating time ［００００］(hours)
2011.07.07 12:45
Status: Ready Com=0
Strat
up
Shut
down
1
Maintenance
Auxiliary
function
Operation
management
Show fault
Menu
Environment
setup menu
From the "Print description" screen, press Menu .
The maintenance selection menu then appears.
If the cursor is not
displayed, press
Show cursor .
Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )
5 Press Reset .
The print count field then indicates a print count of [000000000].
Operation management
Ink operating time ［００００］(hours)
Ink alarm time ［１２００］(hours； standard value:1200)
Cumulative op. time ０００１００ (hours)
Print count ［０００００００００］(prints)
2011.07.07 12:45
Manual
Apply
Status: Ready Com=0
Start
up
Shut
down
Comm
On/Off
4
Press ↓ two times consecutively.
The cursor then moves to the print count field.
7 Press Back .
The system then returns you to the "Print description" screen.
6
Press Apply .

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English