Hitachi PXR-D User Manual

● Startup 2-7
2.1.3 Operations for Modifying the Setting Contents
¡ You can modify the setting contents (print description, character height, excitation
voltage, etc.) in any of the states "Ready," "Standby" and "Stop."
(1) Operation in the "Ready" state
¡ Until you enter the Apply key, the setting contents on the display will not be
reflected. When you have modified the contents, check that the Apply key is
not on display and then restart printing.
¡ In case you enter a print terget signal the instant the Apply key is pressed,
fault "Print Data Changeover in Progress M" occurs.
Start
up
Shut
down
The data entered will be used in the print message.
Solution Press [OK] to accept the data.
OK
Cancel
Cancel
changes
＝＝＝＝＝ Data Entry Confirmation ＝＝＝＝＝
Show
cursor
1
A state with no cursor or
keyboard displayed
The cursor or keyboard is
being displayed.
Input is possible.
←
→
↑
↓
Keyboard
←Cursor
The changed value is not
yet reflected on printing.
←
→
↑
↓
Keyboard
←Cursor
When you press the
Back key to move on,
a confirmation screen
appears.
You can display or
remove the cursor or
keyboard by pressing
the Show cursor key.
The Apply key is
displayed by changing
the setting.
Changing is reflected on printing
by pressing the Apply key.
At this point, the Apply key
disappears.
2
3
Manual
Show
cursor
Manual
Apply
Back
Back
Back
Start
up
Shut
down
Comm
On/Off
Start
up
Shut
down
Comm
On/Off
Manual
Comm
On/Off
Classification Screen name
Data editing
Print line setup, Edit message, Calendar condition,
substitution rule setup, Count condition, Print format,
Printing specifications,Select message,
Save message
Ready,
Standby,
Stop
Auxiliary function
Auxiliary function
Maintenance work
Manage messages, Create user pattern,
Copy data (Memory card → Printer)
Standby,
Stop
Maintenance work User environment setup, Operation management,
Date/time setup, Communication environment setup,
Excitation V update, Password setup/update,
Password protection
Touch screen setup
Copy data (Printer → Memory card)
State in which
setting contents
are modifiable
State in which setting contents are modifiable
¡
As the Apply key appears if you modify the setting contents, be sure to press the
Apply key after you have completed modification.
Procedure: Display the cursor and keyboard ⇒ Enter a value ⇒
Reflect the value in printing
1
2
3
The Apply key appears on
the following screens.
Character input, Calendar
condition, substitution rule
setup, Count condition,
Print format, Printing
specifications, User
environment setup,
Operation management,
Communication
environment setup.

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English