● Ink Replenishment 7-6
5
4
3
2
1
7.3 Ink Replenishment
(1) Overview
¡
While the printer is operated, the ink is automatically transferred at fixed
intervals from the ink reservoir to the main ink tank for replenishment purposes.
¡
If the Ink Low Warning is issued, add ink to the ink reservoir within 60 minutes.
If such a replenishment procedure is not completed within 60 minutes, the
printer comes to a stop.
¡
Ink can be added to the ink reservoir without regard to the IJ printer power
ON/OFF status or operating status.
¡
Upon ink replenishment, the warning is automatically cleared.
¡
Before replenishing the JP-Y37 ink, be sure to shake the ink bottle well until
the precipitated pigment has been dispersed. Also make sure that there is no
sedimentation in ink reservoir or main ink tank (see "Usage Precautions" on
page 1-6).
(2) Operating procedure
Open the maintenance cover and then pull out the reservoir.
Hold the reservoir and pull it forward.
Uncap the ink reservoir and then add ink.
¡
Adjust the amount of replenishment in accordance with the ink
consumption. Exercise care to avoid excessive replenishment.
¡
When moving the reservoir, move it gently.
Fasten the cap of the ink reservoir.
¡
Fasten it securely. Solvent components may evaporate.
Return the reservoir to its original position.
Close the maintenance cover.
If ink is accidentally spilt, wipe
it up promptly with wiping
paper or something similar.
In addition, do not close the
maintenance cover until you
are sure that the wiped portion
has completely dried.
CAUTION
To Next Page
Loading...
Need help?
General
