7-7 ● Makeup ink Replenishment
5
4
3
2
1
7.4 Makeup ink Replenishment
Open the maintenance cover and then pull out the reservoir.
Hold the reservoir and pull it forward.
Uncap the makeup ink reservoir and then add makeup ink.
Fasten the cap of the makeup ink reservoir.
¡
Fasten it securely. Solvent components may evaporate.
¡
When moving the reservoir, move it gently.
¡
Gradually add the makeup ink to avoid spilling. Also, exercise care to
avoid excessive replenishment.
¡
If the mesh filter inside the cap is soiled, take it out and clean it.
Push the reservoir into its original position.
Close the maintenance cover.
(1) Overview
¡
While the printer is operated, the makeup ink is automatically transferred at
fixed intervals from the makeup ink reservoir to the main ink tank for
replenishment purposes.
¡
If the makeup ink low warning is issued, add makeup ink to the makeup ink
reservoir within 60 minutes. If such a replenishment procedure is not
completed within 60 minutes, the printer comes to a stop.
¡
The makeup ink can be added to the makeup ink reservoir without regard to
the IJ printer power ON/OFF status or operating status.
¡
Upon makeup ink replenishment, the alarm is automatically cleared.
(2) Operating procedure
If makeup ink is accidentally
spilt, wipe it up promptly with
wiping paper or something
similar.
In addition, do not close the
maintenance cover until you
are sure that the wiped portion
has completely dried.
CAUTION
To Next Page
Loading...
Need help?
General
