● Setting the Date and Time 4-9
1
4.3 Setting the Date and Time
(1) Overview
¡
The time values to be printed can be set in accordance with the calendar time.
Either of the following two setup methods can be used.
¡The current time is used as the calendar time.
Same as current
time
¡A predefined time is used as the calendar time.
¡
You cannot set a time later than the current time.
Clock stop
¡
You can change the current time.
¡
The year, month, day, hour, minute, and second values can be set.
¡
You can choose between the 24-hour clock and 12-hour clock for setup purposes.
¡
The current time can be set until the year 2079 comes.
When the password is
set up, the current time
cannot be changed.
(2) Operating procedure
¡
Performing date/time setup so that "23:00, July 7, 2011" will be constantly printed.
Choose Environment setup menu from the maintenance menu.
The "Environment setup menu" screen then appears.
（NOTE） If substitution rules are defined for year, do not select "Clock stop" to set a
year earlier than the current year. Even if you set such an earlier year, it is
replaced by a space.
Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )
To Next Page
Loading...
Need help?
General
