IBM 6400 Programmer's Reference

Graph ics Co mm an d Set
Table 88 (Page 2 of 2). Set Line Type
Byte Value Description Error Code
1
X'00'
X'01'
X'02'
X'03'
X'04'
X'05'
X'06'
X'07'
X'08'
Line Type
Drawing default
Dotted Line
Short Dashed Line
Dashed and Dotted Line
Double Dotted Line
Long Dashed Line
Dashed Double Dotted Line
Solid Line
Invisible Line
X'0300..04'
X'0300..0E'
Set Line Width
Description: The Set Line Width order specifies the line width for subsequent
graphics. This order changes the fractional line width attribute only. The printer
uses the last line width received, no matter which order, Set Fractional Line
Width Order or Set Line Width, sets the line width. Parameter P1 specifies the
width of the line for the graphics output. The following values are valid for P1:
19 P1
Table 89. Set Line Width
Byte Value Description Error Code
0 X'19' Order code
1
X'00'
X'01'
X'02'-X'FF'
Line Width
Drawing default
1 Pel Wide (Thin)
2 Pels Wide (Thick)
X'0300..04'
X'0300..0E'
Set Marker Precision
Description: This order sets the value of the current marker precision attribute.
Parameter P1 specifies the type of precision. Precision 2 (character precision) is
the only valid type of precision for this printer. P1 must equal 01 or 02.
3B P1
Table 90. Set Marker Precision
Byte Value Description Error Code
0 X'3B' Order code
1
X'00'
X'01'
X'02'
X'03'
Marker Precision
Drawing default
String Precision
Character Precision
Stroke Precision
X'0300..04'
X'0300..0E'
114 6400 IPDS

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English