IBM 6400 Programmer's Reference

Graph ics Co mm an d Set
Set Marker Set
Description: This order sets the value of the current marker symbol set
attribute. Parameter P1 specifies the local character set identifier. This printer
only uses the default marker set. Thus, P1 must equal 00.
3C P1
Set Marker Symbol
Description: This order sets the value of the current marker symbol attribute for
subsequent markers. See “Marker” on page 106 and “Marker at Current
Position” on page 106 orders.
Parameter P1 specifies the marker symbol attribute value. This value
determines which marker from the marker symbol set the printer uses for
subsequent orders. The following are the marker symbol values:
29 P1
Hex Line Type
00 Drawing Default
01 Cross
02 Plus
03 Diamond
04 Square
05 Six Point Star
06 Eight Point Star
07 Filled Diamond
08 Filled Square
09 Dot
0A Small Circle
40 Blank
Set Mix
Description: This order sets the value of the current mix attribute. The mix
controls the way that the printer combines the color of the foreground with the
color of the medium presentation space. Parameter byte P1 contains the value
of the current mix attribute. The only valid values for this byte are:
0C P1
Table 91. Set Mix
Byte Value Description Error Code
0 X'0C' Order code
1
X'00'
X'02'
Mix Attribute
Drawing default
Overpaint
X'0300..04'
X'0300..0E'
Chapter 3. IPDS Commands Reference 115

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English