Installation and Configuration
Step 4 - Printer Settings
It is recommended that the following fastest default printer settings be used:
•
Printer Control => Interface Selection => Coax
•
Coax Interface => CT0 Format Control => Standard
•
Emulation Configuration => IPDS
•
Emulation Configuration => IPDS => Override Hosts => *Disable
•
Emulation Configuration => IPDS => Check Graphic Quality, Bar Code
Quality, and Graphics Quality settings for desired quality.
Review “Configuring IPDS from the Printer Operator Panel” on page 17 and the
6400 Setup Guide, S246-0116 for information on setting printer configuration
values.
Attaching to LU1-IPDS-PSF/MVS-Remote SNA 3174 Control Unit
LU1-IPDS mode with FM Header support is utilized when PSF support is required
to accomplish the print function desired. (The optional IPDS feature is required to
utilize PSF.) An existing remote 3174 SNA-connected control unit assumed. The
steps required to install an LU1-SCS printer for host definitions are as follows:
1. Define to NCP point to LU1 default logmode entry defined below.
2. Define to VTAM by adding logmode entry to VTAM Logmode Table.
3. Define to JES2.
4. Define to PSF/MVS product.
5. Select the options on the printer that are appropriate for the environment.
Step 1 - NCP Definition
XYZ GROUP TYPE=NCP,...
LINK ADRESS=(032),...
REMPU74 PU ADDR=C1,...
REM6400 LU LOCADDR=#, (Where # relates to 3174 port number)
DLOGMOD=6400PSFR,(Default LOGMODE ENTRY NAME)
MODETAB=MYTABLE (Table name containing MODEENT)
Step 2 - VTAM Definition
The following entry should be placed in the VTAM MODE TABLE specified above
or another of your choice. Alternately, you may utilize the IBM provided entry
"IBM3812"
6400PSFR MODEENT LOGMODE=6400PSFR,
FMPROF=X'03',TSPROF=X'03',PRIPROT=X'B1',
SECPROT=X'B0',COMPROT=X'7080',RUSIZES=X'8585,
PSERVIC=X'014000010000000001000000',
PSNDPAC=X'03',SRCVPAC=X'03',SSNDPAC=X'00'
Step 3 - JES2 Definition (SYS1.PARMLIB)
FSSDEF FSSNAME=FSS1,......
PRT2 FSS=FSS1,Mode=FSS,PRMODE=(LINE,PAGE,SOSI1),
CLASS=B,UCS=0,SEP,NOSEPDS,CKPTPAGE=100,DRAIN,MARK
12 6400 IPDS
To Next Page
Loading...
Need help?
General