IBM 6400 Programmer's Reference

Presentation Text Command Set
Table 50. Absolute Move Inline
Byte Value Description Error Code
0-1 X'2BD3' Text Control Escape Sequence
2 X'04' Length X'021E..01'
3
X'C6'
X'C7'
Absolute Move INLINE
Unchained
Chained
4-5 X'0000' -X'7FFF' Displacement (Ic) See “Notation Conventions” on
page 27
X'0214..01'
Begin Line (BLN)
This control moves the inline and baseline coordinates to the first position on the
next line. The inline margin sets the inline coordinate. The baseline coordinate
increases by the value in the Set Baseline Increment control.
Table 51. Begin Line
Byte Value Description Error Code
0-1 X'2BD3' Text Control Escape Sequence
2 X'02' Length X'021E..01'
3
X'D8'
X'D9'
Begin Line
Unchained
Chained
Begin Suppression (BSU)
This control marks the beginning of a string of text that the printer can suppress
from the printed output. An End Suppression control, with the same suppression
identifier, must follow the Begin Suppression control. An error results when
BSU-ESU text controls are not paired properly or have different suppression IDs.
Suppression of the text output occurs only when activated by a Load Copy
Control with a matching suppression ID.
For additional information about suppression, see Suppression ID in the “Load
Copy Control (LCC)” on page 32.
Table 52. Begin Suppression
Byte Value Description Error Code
0-1 X'2BD3' Text Control Escape Sequence
2 X'03' Length X'021E..01'
3
X'F2'
X'F3'
Begin Suppression
Unchained
Chained
4 X'01' -X'FF' Suppression ID X'0298..01'
Chapter 3. IPDS Commands Reference 65

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English