IBM 6400 Programmer's Reference

Presentation Text Command Set
Table 59. Relative Move Inline
Byte Value Description Error Code
0-1 X'2BD3' Text Control Escape Sequence
2 X'04' Length X'021E..01'
3
X'C8'
X'C9'
Relative Move Inline
Unchained
Chained
4-5 X'8000' -X'7FFF' Increment (Ir) See “Notation Conventions” on
page 27
Repeat String (RPS)
This control contains a string of coded graphic characters that repeats on the
current line. The data field can be a maximum of 253 bytes. The printer does
not check the data for the control sequence introducer (X
'2B'). If the repeat
length is zero, this control is a no-op. If the count equals 04, but the repeat
length is greater than zero, an error occurs.
Table 60. Repeat String
Byte Value Description Error Code
0-1 X'2BD3' Text Control Escape Sequence
2 X'04' -X'FF' Length X'021E..01'
3
X'EE'
X'EF'
Repeat String
Unchained
Chained
4-5 X'0000' -X'7FFF' Repeat Length (RL) X0219..01'
6-n Repeat Data X021F..01'
Set Baseline Increment (SBI)
This control specifies a distance which the printer adds to the current baseline
coordinate when the printer performs a Begin Line control. A value of X
'FFFF'
causes the printer to use the value in the LPD command.
Table 61. Set Baseline Increment
Byte Value Description Error Code
0-1 X'2BD3' Text Control Escape Sequence
2 X'04' Length X'021E..01'
3
X'D0'
X'D1'
Set Baseline Increment
Unchained
Chained
4-5 X'8000' -X'7FFF'
X'FFFF'
Increment (Bi)
See “Notation Conventions” on page 27
Use LPD value or, if no LPD
received, use printer default
70 6400 IPDS

IBM 6400 Specifications

General

Brand	IBM
Model	6400
Category	Printer
Language	English