Icom IC-7000 Instruction Manual

D Auto power OFF activity
121
12
CLOCK AND TIMERS
D Clock2 function activity
D Clock2 offset setting
q Entering time set mode, push [F-1
≤
] or [F-2
≥
] to
select “
CLOCK2 Function
” item.
w Select the CLOCK2 function activity using [DIAL].
e Push [
Z
(
MENU / GRP )] twice to exit time set mode.
q Entering time set mode, push [F-1
≤
] or [F-2
≥
] to
select “
CLOCK2 Offset
” item.
w Rotate [DIAL] to set the offset time within –24:00
to +24:00 in 5min. steps.
e Push [
Z
(
MENU / GRP )] twice to exit time set mode.
The transceiver can be set to automatically turn OFF
after a specified period is with beep when no opera-
tion is performed. The power-off period can be set to
30–120 min. in 30 min. steps.
q Entering time set mode, push [F-2
≥
] to select
“
Auto Power OFF
” item.
w Set the desired power-off time using [DIAL].
•“
Push [SET]
” blinks.
e Push [F-3
SET
] to enter the set time.
•Push [
Z
( MENU / GRP )] to cancel the setting.
r Push [
Z
( MENU / GRP )] twice to exit timer set mode.

Icom IC-7000 Specifications

General

Input voltage	13.8 V
Microphone included	Yes
Product type	Portable CB radio
Product color	Black
Housing material	-
Frequency range	0.5 - 455000 MHz
Channels quantity	503 channels

Weight and Dimensions

Depth	180 mm
Width	167 mm
Height	58 mm