D Compression level setting
• Pre-setting the transceiver
q Select an SSB mode.
w Turn the speech compressor function OFF, if it’s
ON.
●
●
Select
M
-
1
.
●
●
Push [F-2
COM
] momentarily to turn the speech
compressor function OFF.
• “ ” disappears.
e Select ALC meter.
●
●
Select
S
-
1
.
●
●
Push [F-3
MET
] one or more times to select the
ALC meter.
•“ALC” appears.
r Adjust the MIC gain.
●
●
Push [AF(
SET
)] momentarily to enter the set
mode menu.
●
●
Push [F-1
QS
] to enter the quick set mode.
●
●
Push [F-1 Y] or [F-2 Z] to select “
MIC Gain
.”
●
●
Push [PTT] (microphone) to transmit at your
normal voice level.
●
●
While speaking into the microphone, rotate
[DIAL] so that the ALC meter reads within the
ALC zone, whether you speak softly or loudly.
●
●
Push [Z(
MENU
/
GRP
)] twice to return normal op-
erating mode.
• Compression level setting
q Select COMP meter.
●
●
Select
S
-
1
.
●
●
Push [F-3
MET
] one or more times to select the
COMP meter.
•“ ” appears.
w Turn ON the speech compressor function and
enter the speech compression level set mode.
●
●
Select
M
-
1
.
●
●
Push [F-2
COM
] for 1 sec. to enter the speech
compression level set mode.
•speech compressor function automatically turns ON.
e Rotate [DIAL] so that the COMP meter reads be-
tween 10 dB to 20 dB.
NOTE:
When the ALC meter peaks below the ALC
zone, your transmitted voice may be distorted.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
