Icom IC-7000 Instruction Manual

46
4
RECEIVE AND TRANSMIT
4
Pre-set characters can be sent using the memory
keyer send menu. Contents of the memory keyer are
set using the edit menu.
• Transmitting
q Select CW mode with [MODE].
w Set the break-in function ON (p. 87).
•When step t is performed with the break-in function
OFF, the memory keyer contents are monitored.
e Select
S
- 1
.
r Push [F-2
KEY
] to enter the keyer send menu.
•If the keyer root menu appears, push [F-1
SND
]. The
keyer starting menu can be changed in the miscella-
neous (others) set mode (p. 136).
t Push [F-1
M1
] — [F-4
M4
] momentarily to transmit
the contents one time; push these keys for 1 sec.
to transmit the contents repeatedly.
•“
M1
”– “
M4
” are highlighted while transmitting.
•“
(
” and “
)
” appear while transmitting repeatedly.
•While transmitting repeatedly, push any function key to
cancel the transmission.
•Set the repeat interval of the memory keyer to 1–60
sec. (1 sec. steps). See p. 49 for keyer set mode.
•To decrement the contact number, push
[
Y
(
MENU / GRP )].
y Push [
Z
( MENU / GRP )] twice to exit the memory
keyer send menu and return to normal CW mode
indication.
• Memory keyer send menu
Memory keyer
content
Contact number
[MODE]
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]
D Memory keyer send menu
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from:
M
,
S
or
G
(Graphic)
Menu selection (Example: S)
Push [MENU/GRP] momentarily.
Selection from:
S - 1
,
S - 2
or
S - 3
Either
Y or Z
Either
Y or Z

Icom IC-7000 Specifications

General

Input voltage	13.8 V
Microphone included	Yes
Product type	Portable CB radio
Product color	Black
Housing material	-
Frequency range	0.5 - 455000 MHz
Channels quantity	503 channels

Weight and Dimensions

Depth	180 mm
Width	167 mm
Height	58 mm