Icom IC-7000 Instruction Manual

55
4
RECEIVE AND TRANSMIT
D
RTTY decode set mode
This set mode is used to set the decode USOS func-
tion, etc.
q Push [MODE] momentarily to select RTTY mode.
•After RTTY mode is selected, push [MODE] for 1 sec.
to toggle between RTTY and RTTY-R modes.
w Select
S
- 1
.
e Push [F-2
DEC
] momentarily to turn the RTTY de-
coder ON.
• RTTY decoder screen appears.
r Push [F-4
SET
] to select the RTTY decode set
mode.
t Push [F-1
≤
] or [F-2
≥
] to select the desired set
item.
y Set the desired condition using [DIAL].
•Push [F-4
DEF
] for 1 sec. to select a default condition
or value.
u Push [
Z
( MENU / GRP )] to exit from set mode.
•Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group
S
.
•Push [MENU/GRP] momentarily one or more times to
select the menu
S
- 1
.
[MENU/GRP] [F-1] [F-2] [F-4] [DIAL]
1
RTTY Decode USOS
This item selects the USOS (UnShift On Space) func-
tion of the internal RTTY decoder.
ON
Decode as letter code
(default)
OFF
Decode as character code
2
RTTY Decode New Line Code
This item selects the new line code of the internal
RTTY decoder.
CR : Carriage Return
LF : Line Feed
CR,LF,CR+LF
CR, LF and CR+LF
(default)
CR+LF
CR+LF only

Icom IC-7000 Specifications

General

Input voltage	13.8 V
Microphone included	Yes
Product type	Portable CB radio
Product color	Black
Housing material	-
Frequency range	0.5 - 455000 MHz
Channels quantity	503 channels

Weight and Dimensions

Depth	180 mm
Width	167 mm
Height	58 mm