EasyManuals Logo
Home>Icom>Transceiver>IC-7000

Icom IC-7000 Instruction Manual

Icom IC-7000
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
131
13
SET MODE
7
RF/SQL Control
The [RF/SQL] control can be set as the RF/squelch
control (default), the squelch control only (RF gain is
fixed at maximum) or ‘Auto’ (RF gain control in SSB,
CW and RTTY; squelch control in AM and FM).
See pgs. 1, 35 for details.
RF+SQL
[RF/SQL] control as RF/squelch control
SQL
[RF/SQL] control as squelch control
AUTO
[RF/SQL] control as RF gain control in SSB,
CW and RTTY; squelch control in AM and
FM (default)
Miscellaneous (others) set mode (continued)
8
Quick SPLIT
When this item is set to ON, pushing and holding [F-1
SPL
] (
M
-
1
) for 1 sec. sets the undisplayed VFO fre-
quency to the displayed VFO frequency plus the split
offset and activates split operation.
See p. 92 for details.
ON
Quick split ON
(default)
OFF
Quick split OFF
10
SPLIT LOCK
When this item is ON, [DIAL] can be used to adjust
the transmit frequency while pushing [XFC] even
while the lock function is activated.
See p. 91 for split frequency operation details.
ON
Split lock function ON
OFF
Split lock function OFF
(default)
9
SPLIT Offset
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
The offset frequency can be set from –9.999 MHz to
+9.999 MHz in 1 kHz steps.
0.000MHz
0.000 MHz offset
(default)
-9.999MHz
Minus 9.999 MHz offset
12
DUP Offset 50M
This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for the 50 MHz band.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.
0.500MHz
0.5 MHz offset (default)
11
DUP Offset HF
This item sets the offset (difference between transmit
and receive frequencies) for duplex operation. How-
ever, this setting is used to input the repeater offset
for an HF band only.
The offset frequency can be set from 0.000 MHz to
+9.999 MHz in 1 kHz steps.
0.100MHz
0.1 MHz offset (default)

Table of Contents

Other manuals for Icom IC-7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-7000 and is the answer not in the manual?

Icom IC-7000 Specifications

General IconGeneral
Input voltage13.8 V
Microphone includedYes
Product typePortable CB radio
Product colorBlack
Housing material-
Frequency range0.5 - 455000 MHz
Channels quantity503 channels
Weight and Dimensions IconWeight and Dimensions
Depth180 mm
Width167 mm
Height58 mm

Related product manuals