Icom IC-7000 Instruction Manual

81
5
FUNCTIONS FOR RECEIVE
■ Noise reduction
The noise reduction function enhances desired sig-
nals in the presence of noise by using the DSP cir-
cuit. The amount of enhancement is adjustable.
➥ Push [NR/LEV] momentarily to toggle the noise re-
duction ON and OFF.
• “ ” indicator appears when the NR function is ON.
The noise reduction level can result in audio signal
masking. Set the noise reduction level for maxi-
mum readability as described below.
Noise reduction OFF Noise reduction activated
Desired
signal (CW)
Noise components
0
NR Level
NR
5
NR Level
NR
[MENU/GRP] [NR/LEV][F-4] [DIAL]
Appears
NR Level
This item adjusts the noise reduction level. The noise
reduction level can be adjusted from 0 to 15.
 4
4 (default)
D
Noise reduction set mode
q Push [NR/LEV] for 1 sec. to enter the noise reduc-
tion level set mode.
w Rotate [DIAL] to adjust the noise reduction level.
• Set the noise reduction level 0 to 15.
•Push [F-4
DEF
] for 1 sec. to return to default level.
e Push [NR/LEV] (or push [
Z
(
MENU / GRP )]) to exit the
noise reduction level set mode.

Icom IC-7000 Specifications

General

Input voltage	13.8 V
Microphone included	Yes
Product type	Portable CB radio
Product color	Black
Housing material	-
Frequency range	0.5 - 455000 MHz
Channels quantity	503 channels

Weight and Dimensions

Depth	180 mm
Width	167 mm
Height	58 mm