POWER
HEAD
REMOVAL - 9.9/15
REMOVAL - 9.9/15
~
WARNING
~
To prevent accidental starting
of
engine
while
servicing,
twist
and remove all spark
plug
leads. On electric start models, dis-
connect
battery cables at the battery. Dis-
connect
battery positive (+) cable
first
and
then
the
battery negative
(-)
cable.
Remove the two screws
and
nuts from the top
rear of
lower engine cover.
Remove
the water indicator hose and remove the
screw from the
lower rear of the lower engine
cover.
180
Remove the two screws from the top front of the
lower engine cover.
Remove
the screw and nut from the lower front of
the lower engine cover.
Remove
the lower covers.
Remove
electrical components. Refer to ELEC-
TRICAL section.
Remove the fuel components. Refer to FUEL
SYSTEM section.
Remove the ignition components. Refer to IGNI-
TION section.
Remove the shift lever and linkage. Refer to
SHIFT LINKAGE
on
p.
175.
If equipped with a steering handle, remove the
handle
and
components. Refer to MIDSECTION
section.
To Next Page
Loading...
Need help?
General
