To install a power supply in an EX4200 switch, follow instructions in “Installing a Power
Supply in an EX4200 Switch” on page 183. To remove a power supply from an EX4200
switch, follow instructions in “Removing a Power Supply from an EX4200 Switch” on
page 185.
To install a fan tray in an EX4200 switch, follow instructions in “Installing a Fan Tray in
an EX4200 Switch” on page 179. To remove a fan tray from an EX4200 switch, follow
instructions in “Removing a Fan Tray from an EX4200 Switch” on page 180.
To install an uplink module in an EX4200 switch, follow instructions in “Installing an
Uplink Module in an EX4200 Switch” on page 187. To remove an uplink module from an
EX4200 switch, follow instructions in “Removing an Uplink Module from an EX4200
Switch” on page 189.
To install an SFP, SFP+, or XFP transceiver in an EX4200 switch, follow instructions in
“Installing a Transceiver” on page 193. To remove an SFP, SFP+, or XFP transceiver from
an EX4200 switch, follow instructions in “Removing a Transceiver” on page 195.
Related
Documentation
• Cooling System and Airflow in an EX4200 Switch on page 31
• Power Supply in EX4200 Switches on page 33
• Uplink Modules in EX4200 Switches on page 18
• Pluggable Transceivers Supported on EX4200 Switches on page 79
141Copyright © 2017, Juniper Networks, Inc.
Chapter 12: Installing the Switch
To Next Page
Loading...
Need help?
General