•
Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this documentation. Such an action could cause severe electrical shock.
•
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
•
Avoid spilling liquid onto the chassis or onto any hardware component. Such an action
could cause electrical shock or damage the hardware equipment.
•
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
•
Some parts of the router might become hot. The following label provides the warning
of the hot surfaces on the router:
Related
Documentation
General Safety Warnings for Juniper Networks Devices on page 144•
General Safety Warnings for Juniper Networks Devices
•
Qualified Personnel Warning on page 144
•
Restricted-Access Area Warning on page 145
Qualified Personnel Warning
WARNING: Only trained and qualified personnel should install or replace the
hardware equipment.
Waarschuwing Installatie en reparaties mogen uitsluitend door getraind en
bevoegd personeel uitgevoerd worden.
Varoitus Ainoastaankoulutettuja pätevähenkilökuntasaa asentaa tai vaihtaa
tämän laitteen.
Attention Tout installation ou remplacement de l'appareil doit être réalisé
par du personnel qualifié et compétent.
Warnung Gerät nur von geschultem, qualifiziertem Personal installieren oder
auswechseln lassen.
Avvertenza Solo personale addestrato e qualificato deve essere autorizzato
ad installare o sostituire questo apparecchio.
Advarsel Kun kvalifisert personell med riktig opplæring bør montere eller
bytte ut dette utstyret.
Aviso Este equipamento deverá ser instalado ou substituÃdo apenas por
pessoal devidamente treinado e qualificado.
Copyright © 2019, Juniper Networks, Inc.144
MX5, MX10, MX40, and MX80 Universal Routing Platforms Hardware Guide
To Next Page
Loading...
Need help?
General
