Figure 15: AC Power Supplies Installed in an MX5, MX10, MX40, and MX80 Router
Figure 16: DC Power Supplies Installed in an MX5, MX10, MX40, and MX80 Router
•
AC Power Supply Description on page 33
•
DC Power Supply Description on page 34
AC Power Supply Description
Each AC power supply weighs approximately 2.6 lb (1.18 kg) and consists of a handle,
an ejection lever, an AC appliance inlet, an AC input switch, a fan, and an LED to monitor
the status of the power supply. Figure 17 on page 34 shows the power supply.
Each inlet requires a dedicated AC power feed and a dedicated customer site circuit
breaker. We recommend that you use a minimum 15 A (110 VAC) customer site circuit
breaker, or as required by local code.
33Copyright © 2019, Juniper Networks, Inc.
Chapter 1: Overview
To Next Page
Loading...
Need help?
General
