Installation Instructions Warning
WARNING: Read the installation instructions before you connectthe hardware
equipment to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeetennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la sourced'alimentation,consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare leistruzioni di installazioneprima di collegareil sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Rack-Mounting Requirements and Warnings
Ensure that the equipment rack into which the chassis is installed is evenly and securely
supported, to avoid the hazardous condition that could result from uneven mechanical
loading.
WARNING: To prevent bodily injury when mounting or servicing the chassis
in a rack, take the following precautions to ensure that the system remains
stable. The following directives help maintain your safety:
•
The chassis must be installed into a rack that is secured to the building
structure.
•
The chassis should be mounted at the bottom of the rack if it is the only
unit in the rack.
Copyright © 2019, Juniper Networks, Inc.150
MX5, MX10, MX40, and MX80 Universal Routing Platforms Hardware Guide
To Next Page
Loading...
Need help?
General
