To Next Page

To Previous Page

NOTE: After you configure the basic settings, the J-Web Setup wizard

redirects you to the J-Web pages where you can continue working in the

J-Web interface.

Configuring Basic System Properties

Table 36 on page 90 through Table 37 on page 90 summarizes the configuration details

for initial setup.

Table 36: Required Setup Fields

Your ActionFieldSetup Wizard Page

Read the introduction page for

basic instructions on using the

setup wizard. Click Start to

continue.

Introduction

Configure System: Identification

Type the name of the services

gateway.

Host Name

Type the name of the network

or subnetwork to which the

services gateway belongs

Domain Name

Type the password that user

root will use to log in to the

device.

Root Password (required)

Retype the root password.Verify Root Password

(required)

Configure J-Web Preferences

Specify the tab you want to

appear when J-Web starts.

J-Web starting page options

Specify when you want J-Web

to commit your configuration

changes.

J-Web commit options

Table 37: Optional Setup Fields

Your ActionFunctionField

Configure System:

Identification

SRX110 Services Gateway Hardware Guide

Juniper SRX110 Hardware Guide

Other manuals for Juniper SRX110