Information You Might Need to Supply to Juniper Networks Technical Assistance Center
If you are returning a services gateway or hardware component to Juniper Networks for
repair or replacement, obtain a Return Materials Authorization (RMA) number from
Juniper Networks Technical Assistance Center (JTAC).
When requesting support from JTAC by telephone, be prepared to provide the following
information:
•
Your existing case number, if you have one
•
Details of the failure or problem
•
Type of activity being performed on the services gateway when the problem occurred
•
Configuration data displayed by one or more show commands
•
Your name, organization name, telephone number, fax number, and shipping address
Related
Documentation
Return Procedure for the SRX110 Services Gateway on page 139•
• Locating the SRX110 Services Gateway Component Serial Number and Agency Labels
on page 140
• Contacting Customer Support on page 142
Contacting Customer Support
Once you have located the serial numbers of the services gateway or component, you
can return them for repair or replacement. For this, you need to contact Juniper Networks
Technical Assistance Center (JTAC).
You can contact JTAC 24 hours a day, 7 days a week, using any of the following methods:
•
On the Web: Using the Case Manager link at http://www.juniper.net/support/
•
By telephone:
•
From the US and Canada: 1-888-314-JTAC
•
From all other locations: 1-408-745-9500
NOTE: If contacting JTAC by telephone, enter your 11-digit case number
followed by the pound (#) key if this is an existing case, or press the star
(*) key to be routed to the next available support engineer.
Related
Documentation
Return Procedure for the SRX110 Services Gateway on page 139•
• Locating the SRX110 Services Gateway Component Serial Number and Agency Labels
on page 140
• Packing the SRX110 Services Gateway and Components for Shipment on page 143
Copyright © 2013, Juniper Networks, Inc.142
SRX110 Services Gateway Hardware Guide
To Next Page
Loading...
Need help?
General
