The following examples provide the sample output of commands:
For SRX110 Services Gateway (SRX110H-VA)
user@host >show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis AX0021AF0037 SRX110h-va
Routing Engine REV 01 650-035910 AX0021AF0037 RE-SRX110H-VA
FPC 0 FPC
PIC 0 8x FE Base PIC
FPC 1 FPC
PIC 0 Internal VDSL2/ADSL-POTS
Power Supply 0
show chassis environment
user@host > show chassis environment
Class Item Status Measurement
Temp Routing Engine OK 64 degrees C / 147 degrees F
Routing Engine CPU Absent
Power Power Supply 0 OK
show chassis fpc
user@host >show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online -------------------- CPU less FPC --------------------
1 Online -------------------- CPU less FPC --------------------
show chassis alarms
user@host >show chassis alarms
No alarms currently active
Monitoring the SRX110 Services Gateway Components Using LEDs
You can monitor the chassis condition by using the LEDs. Table 39 on page 99 lists the
LEDs, their condition, the possible causes and corrective actions.
Copyright © 2013, Juniper Networks, Inc.98
SRX110 Services Gateway Hardware Guide
To Next Page
Loading...
Need help?
General
