•
SIM card lock/unlock—You can use CLI request commands to lock or unlock the SIM
card.
•
PIN code storage option—You can store the PIN code you provide in the services
gateway configuration so that the SIM can be unlocked without the need for user
intervention every time the device is rebooted or reset.
NOTE: Currently, all GSM cards support PIN-protected SIMs.
Related
Documentation
SRX110 Services Gateway 3G USB Modem Overview on page 21•
• Installing a 3G USB Modem in the SRX110 Services Gateway USB Port on page 24
• SRX110 Services Gateway 3G-WAN USB Port Physical Specifications on page 24
SRX110 Services Gateway 3G-WAN USB Port Physical Specifications
Table 13 on page 24 lists the physical specifications of the SRX110 Services Gateway
3G-WAN USB port.
Table 13: SRX110 Services Gateway 3G-WAN USB Port Physical
Specifications
ValueSpecification
5 VVoltage supply
0.5 ACurrent rating
2.5 WMaximum power consumption
Related
Documentation
Configuring the 3G USB Modem on the SRX110 Services Gateway on page 27•
• Installing a 3G USB Modem in the SRX110 Services Gateway USB Port on page 24
Installing a 3G USB Modem in the SRX110 Services Gateway USB Port
This topic includes the following sections:
•
Connecting the 3G USB Modem on the USB Modem Extension Cable-Mount on page 24
•
Installing a 3G USB Modem on the Rear Side of the SRX110 Services Gateway on page 26
Connecting the 3G USB Modem on the USB Modem Extension Cable-Mount
The 3G USB modem is secured with a USB protection cover as shown in
Figure 10 on page 25.
Copyright © 2013, Juniper Networks, Inc.24
SRX110 Services Gateway Hardware Guide