Juniper SRX110 Hardware Guide

• SRX110 Services Gateway Integrated VDSL2 Interface Supported Profiles on page 30
• SRX110 Services Gateway Integrated VDSL2 Interface LEDs on page 31
• Configuring the Integrated VDSL2 Interface on the SRX110 Services Gateway on page 32
SRX110 Services Gateway Integrated VDSL2 Interface Key Features
The following features are supported on integrated VDSL2:
•
ADSL/ADSL2/ADSL2+ backward compatibility with POTS supporting Annex-A
(Annex-M) and ISDN supporting Annex-B
•
Packet Mode Transfer (PTM) or Ethernet in the First Mile (EFM) (802.3ah)
•
Operation, Administration, and Maintenance (OAM) support for ADSL/ADSL2/ADSL2+
mode
•
Asynchronous Transfer Mode (ATM) quality of service (QoS) (supported only when
the VDSL2 interface is operating in ADSL2 mode)
•
Multilink Point-to-Point Protocol (MLPPP) (supported only when the VDSL2 interface
is operating in ADSL2 mode)
•
Support for a maximum of 10 permanent virtual connections (PVCs) (only in
ADSL/ADSL2/ADSL2+ mode)
•
Dying Gasp support (ADSL/ADSL2/ADSL2+ and VDSL2 modes)
Related
Documentation
SRX110 Services Gateway Integrated VDSL2 Interface Overview on page 29•
• SRX110 Services Gateway Integrated VDSL2 Interface LEDs on page 31
• Configuring the Integrated VDSL2 Interface on the SRX110 Services Gateway on page 32
SRX110 Services Gateway Integrated VDSL2 Interface Supported Profiles
A profile is a table that contains a list of preconfigured VDSL2 settings. Table 16 on page 30
lists the different profiles supported on integrated VDSL2, along with their data rates.
Table 16: Profiles Supported on the Integrated VDSL2 Interface
Data Rate (Mbps)Profile
508a
508b
508c
508d
6812a
Copyright © 2013, Juniper Networks, Inc.30
SRX110 Services Gateway Hardware Guide

Juniper SRX110 Specifications

General

Brand	Juniper
Model	SRX110
Category	Gateway
Language	English