Juniper SRX110 Hardware Guide

CHAPTER 7
Required Tools and Parts for Installing and
Maintaining the SRX110 Services Gateway
This chapter includes the following topic:
•
Required Tools and Parts for Installing and Maintaining the SRX110 Services
Gateway on page 47
Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
Table 23 on page 47 lists the tools and equipments required for installing and maintaining
the SRX110 Services Gateway.
Table 23: Required Tools and Parts for Installing and Maintaining the
SRX110 Services Gateway
Additional InformationTools and PartsTask
“Installing the SRX110 Services
Gateway in a Rack” on page 58
“Installing the SRX110 Services
Gateway on a Desk” on page 62
“Installing the SRX110 Services
Gateway on a Wall” on page 63
•
Phillips (+) screwdriver,
number 1
•
Phillips (+) screwdriver,
number 3
•
Tie wrap
Installing the SRX110
Services Gateway
“Connecting the SRX110 Services
Gateway to the Power Supply” on
page 67
Electrostatic discharge (ESD)
grounding wrist strap
Connecting the
SRX110 Services
Gateway
“Grounding the SRX110 Services
Gateway” on page 69
Phillips (+) screwdriver,
number 1
Grounding the SRX110
Services Gateway
“Packing the SRX110 Services Gateway
and Components for Shipment” on
page 143
•
Electrostatic bag or
antistatic mat, for each
component
•
Electrostatic discharge
(ESD) grounding wrist strap
Packing the SRX110
Services Gateway
47Copyright © 2013, Juniper Networks, Inc.

Juniper SRX110 Specifications

General

Brand	Juniper
Model	SRX110
Category	Gateway
Language	English