Packing the Components for Shipment
Follow these guidelines for packing and shipping individual components of the services
gateway:
•
When you return a component, make sure that it is adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
•
Use the original shipping materials if they are available.
•
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
CAUTION: Do not stack any of the services gateway components during
packing.
Related
Documentation
• Contacting Customer Support on page 142
• Locating the SRX110 Services Gateway Component Serial Number and Agency Labels
on page 140
• Return Procedure for the SRX110 Services Gateway on page 139
• Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 142
Copyright © 2013, Juniper Networks, Inc.144
SRX110 Services Gateway Hardware Guide
To Next Page
Loading...
Need help?
General
