KYMCO XCITING 500 User Manual (English)

To Next Page

To Previous Page

6. COOLING SYSTEM

6-8

XCITING 500

Bleed air from the system as follow:

1. Start the engine and let it idle for 2−3

minutes.

2. Snap the throttle three to four times to

bleed air from the system.

3. Stop the engine and add coolant to the

proper level if necessary. Reinstall the

radiator cap.

4. Check the level of coolant in the reserve

tank and fill to the upper level if it is

low.

THERMOSTAT

REMOVAL

Remove the floorboard (page 2-6).

Remove the ignition coil (page 18-5).

Remove the nut and thermostat housing

stay from the frame.

Remove the bolts, housing stay and

thermostat housing cover.

Housing stay

Housing Stay Housing Cove

Bolts

Other manuals for KYMCO XCITING 500

Need help?

Do you have a question about the KYMCO XCITING 500 and is the answer not in the manual?

General