Name: KYMCO XCITING 500
Brand: KYMCO
Rating: 5 (1 reviews)

To Next Page

To Previous Page

17. BATTERY/CHARGING SYSTEM

17-5

XCITING 500

BATTERY

REMOVAL/INSTALLATION

Unlock and open the seat (page 2-3).

Turn ignition switch OFF.

Remove the screws and battery box cover.

Remove the battery retainer.

With the ignition switch to “OFF” disconnect

the negative (-) terminal lead from the battery

first, then disconnect the positive (+) terminal

lead.

Pull out the battery from the battery box.

Installation is in the reverse order of removal.

After connecting the battery cables, coat the

terminals with grease.

VOLTAGE INSPECTION

Remove the battery cover (see above).

Measure the battery voltage using a

commercially available digital multimeter.

Voltage (20ºC/68ºC):

Fully charged: 13.0－13.2 V

Under charged: below 12.3 V

Screws

Battery Box Cove

Positive Terminal Negative Terminal

Battery Battery Retaine

Other manuals for KYMCO XCITING 500

Questions and Answers:

Need help?

Do you have a question about the KYMCO XCITING 500 and is the answer not in the manual?

General