Name: KYMCO XCITING 500
Brand: KYMCO
Rating: 5 (1 reviews)

To Next Page

To Previous Page

20. LIGHTS/METERS/SWITCHES

20-1

XCITING 500

SERVICE INFORMATION

GENERAL

• Note the following when replacing the halogen headlight bulb

ä Wear clean gloves while replacing the bulb. Do not put finger prints on the headlight bulb,

as they may create hot spots on the bulb and cause it to fail.

ä If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to

prevent its early failure.

ä Be sure to install the dust cover after replacing the bulb.

• Check the battery condition before performing any inspection that requires proper battery

voltage.

• A continuity test can be made with the switches installed on the scooter.

• Route the wires and cables properly after servicing each component.

A halogen head light bulb becomes very hot while the head light is on, and remains for a while

after it is turned off. Be sure to let it cool down before servicing.

＊

Other manuals for KYMCO XCITING 500

Questions and Answers:

Need help?

Do you have a question about the KYMCO XCITING 500 and is the answer not in the manual?

General