KYMCO XCITING 500 Service Manual

16. BRAKE SYSTEM
16-24
XCITING 500
FRONT BRAKE CALIPER
REMOVAL
Drain the front brake hydraulic system (left
front brake caliper: page 16-4) or
combination brake hydraulic system (right
front brake caliper: page 16-5).
Remove the brake pads (page 16-10).
Remove the oil bolts, sealing washers and
brake hose from the brake caliper.
Remove the mount bolts and front brake
caliper.
DISASSEMBLY
Remove pad spring from the caliper body.
Bolts Sealing Washers
Brake Hose
Pad Spring Retaine
r
Sealing Washers Sealing Washers
Brake Calipe
r
Bolts
Do not remove the retainer from the
bracket unless replacement.
＊

KYMCO XCITING 500 Specifications

General

Displacement	499 cc
Cooling System	Liquid-cooled
Transmission	CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shocks
Front Brake	Dual disc
Rear Brake	Single disc
Seat Height	800 mm
Tire (Front)	120/70-15
Tire (Rear)	150/70-14
Engine Type	4-stroke, single-cylinder
Fuel System	Electronic Fuel Injection
Fuel Capacity	12.8 L
Length x Width x Height	2250 x 800 x 1450 mm