159
5. PARAMETERS
5.4 (E) Environment setting parameters
3
4
5
5
5
6
7
8
9
10
5.4 (E) Environment setting parameters
Purpose Parameter to set Refer to
page
To set the time Real time clock function P.E020 to P.E022 Pr.1006 to Pr.1008 160
To set a limit for the reset function
To shut off output if the operation panel
disconnects
To force deceleration to a stop on the
operation panel
Reset selection/
disconnected PU detection/
PU stop selection/Reset
limit
P.E100 to P.E102,
P.E107
Pr.75 162
To select the display language of the
parameter unit
PU display language
selection
P.E103 Pr.145 165
To control the buzzer of the parameter unit
and operation panel
PU buzzer control P.E104 Pr.990 165
To adjust the LCD contrast of the
parameter unit
PU contrast adjustment P.E105 Pr.991 165
To switch the monitor display of the
operation panel to the PID set point setting
screen by simply turning the setting dial
Direct setting P.E108 Pr.1000 166
To use the USB memory USB host reset P.E110 Pr.1049 166
To use the regeneration unit to increase
the motor braking torque
Regenerative brake
selection
P.E300 Pr.30 553
To change the overload current rating
specification
Multiple rating setting P.E301 Pr.570 167
To prevent parameter rewriting Parameter write disable
selection
P.E400 Pr.77 168
To restrict parameters with a password Password function P.E410, P.E411 Pr.296, Pr.297 170
To use parameters freely Free parameter P.E420, P.E421 Pr.888, Pr.889 172
To change parameter settings for a PM
motor as a batch
PM parameter initialization P.E430 Pr.998 151
To set multiple parameters as a batch Automatic parameter
setting
P.E431 Pr.999 173
To display the required parameters Applicable parameter
display and user group
function
P.E440 to P.E443 Pr.160, Pr.172 to
Pr.174
177
To release the parameter copy warning
(CP)
Parameter copy alarm
release
P.E490 Pr.989 166
To reduce the motor noise and EMI PWM carrier frequency
changing
P.E600 to P.E602 Pr.72, Pr.240, Pr.260 179
To understand the maintenance time of
inverter parts and peripheral device
Inverter parts life display P.E700 to P.E707 Pr.255 to Pr.259,
Pr.506 to Pr.508
182
Maintenance output
function
P.E710 to P.E715 Pr.503, Pr.504,
Pr.686 to Pr.689
186
Current average value
monitor signal
P.E720 to P.E722 Pr.555 to Pr.557 187
To Next Page
Loading...
Need help?
General
