Mitsubishi Electric FR-F846-00023-L2 User Manual

65
2. INSTALLATION AND WIRING
2.7 Communication connectors and terminals
3
2
3
4
5
6
7
8
9
10
2.7 Communication connectors and terminals
2.7.1 PU connector
 Removal and reinstallation of the accessory cover
1. Loosen the two screws on the accessory cover.
(These screws cannot be removed.)
2. Press the upper edge of the accessory cover while pulling out the accessory cover.
To install the accessory cover, fit it securely and tighten the screws. (Tightening torque: 0.40 to 0.45 N·m)
LoosenLoosen

Mitsubishi Electric FR-F846-00023-L2 Specifications

General

Brand	Mitsubishi Electric
Model	FR-F846-00023-L2
Category	Inverter
Language	English