Mitsubishi GOT2000 Series User Manual

2.14 Operator Authentication
2 - 63
2
GOT BASIC SETTING
(c) Touch the level, and then the Operator
level input dialog is displayed. Input an
operator level.
When the input is completed, touch the
[Enter] key.
When the level of the operator being
login is changed during editing the
operator information, a new level is not
reflected until you log out of the GOT
once and log in the GOT again.
(d) For changing passwords during editing,
touch the password.
The New password input dialog is
displayed, and then input a password.
When the input is completed, touch the
[Enter] key.
When the password input is completed,
the New password input confirmation
dialog is displayed. Input the same
password.
(e) For enabling the setting of [Make a
permanent password], touch the check
box for [Make a permanent password],
and then the setting is switched.
: Disabled
: Enabled
(f) For using the external authentication
ID, touch the check box "Use ext. auth.
ID" and switch the setting.
: The external authentication ID is
not used.
: Use ext. auth. ID
(g) Touch Ext.auth ID to display the
external authentication ID input dialog,
and enter the external recognition ID.
When the input is completed, touch the
[Enter] key.
When the authentication method is set
to [External auth (general)], the
external authentication ID can be input
with an external authentication device.
(Continued to next page)

Mitsubishi GOT2000 Series Specifications

General

Brand	Mitsubishi
Model	GOT2000 Series
Category	Control Panel
Language	English