11 - 26
11.7 Keyword
11.7.3 Regist
Keyword is registered.
Step 1. Touch "Regist" to display the selection
screen for the registration.
For the FX series PLC, which is not
compatible with Customer Keyword, the
keyword entry screen of [Step3] is
displayed. Start the operation from
[Step3].
For the Customer Keyword compatible
models, refer to the manual of the PLC
to be used.
Step 2. Select [Keyword] or [Keyword+Custom].
To register only Keyword and 2nd
keyword, touch [Keyword].
To register Customer Keyword, touch
[Keyword+Custom].
Step 3. Input a keyword.
Touch the display part of the keyword to
be registered.
Step 4. The keyboard for entering a keyword is
displayed. Character types to be input
can be changed by touching the [A-F] or
[0-9] button. Enter a keyword and touch
the [ENT] key.
For the keyword, 8 digits from 0 to 9 or
A to F must be set.
Step 5. After completing the keyword entry,
touch [Next].
When [Keyword+Custom] is selected on
the selection screen for the registration,
the Customer Keyword entry screen is
displayed. Enter it in the same way as
for Keyword and 2nd keyword.
Touch
To Next Page
Loading...
Need help?
General
